0 Members and 1 Guest are viewing this topic.

AuthorTopic: Scheduled jobs created through the BAT do not start in Cisco CallManager  (Read 1235 times)

Offline aegkaluk

  • Administrator
  • Hero Member
  • *****
  • Posts: 1103
  • Total Like : 0
    • Email
« on: 07, 05, 2013, 17:17:10 »
Scheduled jobs created through the BAT do not start in Cisco CallManager The scheduler shows a pending status for these jobs

Resolution
When Bulk Administration Tool (BAT)-scheduled jobs show a pending status, confirm that the mandatory services required to run each job have been activated.
Complete these steps in order to do this:
From the Navigation drop-down list at the top left of the Cisco CallManager Administration page, choose Cisco Unified CallManager Serviceability and click Go.
Once the Cisco Unified CallManager Serviceability page appears, choose Tools > Service Activation.
Check the status of these Database and Admin services:

 
1.Cisco Administrative XML Layer (AXL) Web Service

   
2.Cisco Bulk Provisioning Service (BPS)

3.Check that there is no other job in Processing state. BPS can process only one job at a time. Also check if Stop Processing is requested for BPS transactions. If so, choose Job Scheduler and click Start Processing.

Cisco Tool for Auto-Registered Phones Support (TAPS) Service
Note: These services must be activated in order to run scheduled jobs created through BAT.


https://supportforums.cisco.com/docs/DOC-5197